Construction

What are pneumatic tools and how can we handle them without putting you in danger? This course will take you to the essential safety toolkits you will need when handling these air-powered tools. 

Pneumatic Tools Safety
All About  Pneumatic Tools


Lesson Objectives
In this lesson, we will discuss:
What are pneumatic tools,
Some examples of pneumatic tools, and
The common hazards when handling these tools.


What must you consider when working with pneumatic tools?


All About Pneumatic Tools

Pneumatic Tools Safety
Basic Pneumatic Tools Safety


Lesson Objective
Let's discuss the basic safety measures you must consider when operating pneumatic tools.


Preparation Stage
Here are some tips to consider before operating the equipment.


Handling Stage
Here are some tips to consider when you're using the equipment.


TIP #1
Ensure that the compressed air is clean and dry.
A moist, dusty, and corrosive fume may damage the tool. A good filter, regulator, and lubricator will enhance the tool's life.


TIP #2
Ensure that the tools are lubricated, cleaned, and maintained according to the manufacturer's instructions.


TIP #3
Know the times when the tool must be disconnected.
This includes the times before you use it and when it is not in use.
You must also disconnect it when you're clearing a jammed fastener and while changing accessories.


TIP #4
Only use attachments according to the manufacturer's instructions.


TIP #5
Secure all attachments with a safety clip or retainer
Hazards such as accidental ejection of the attachments could be avoided when this is followed.


TIP #6
Check if the tool is securely fastened to the air hose.
To add as an additional safeguard, you may use a short wire or a positive locking device.


Which times do you need to disconnect the tool?


Basic Pneumatic Tools Safety

Pneumatic Tools Safety
Handling Air Hoses


Lesson Objectives
In this lesson, we will discuss how to handle air hoses.


Tip #1
Use hoses with a specific design.
Pick hoses that are designed to be abrasion, cutting, crushing, and flexing resistant.


Tip #2
Mind where your hose is.
Keep them away from heat, oil, sharp edges, or any
potential physical damage


Tip #3
Regularly check your hose.
Look out for cuts, bulges, and abrasions. If you find defects, replace it immediately.


Tip #4
Clean the air line before connecting the tool.
Hold the hose firmly and blow it away from yourself and your coworkers.
This ensures that there is no debris or water inside.


Which of the following must your air hose be resistant to when choosing one?


Handling Air Hoses

Pneumatic Tools Safety
Handling Compressed Air


Lesson Objectives
In this lesson, we will discuss unsafe ways to use compressed air.


TIP #1
It's dangerous to clean with compressed air.
If you can, use vacuums, brooms, or dusters instead.


TIP #2
Beware of the nozzle pressure when you need to clean with compressed air.
You must also use personal protective equipment (PPE) and chip-guarding techniques.


TIP #3
Never point air guns on anyone.
Doing so will potentially harm your coworkers.


TIP #4
Don't use "dead-end" compressed air guns on anyone.
This would ensure yours and your coworkers' safety.


New

free course

Pneumatic Tools Safety

Pneumatic Tools Safety Lessons

Course overview

The full course includes

Explore more

EdApp is easy to use and free for you and your team. No credit card required.